productsEM358 USB Stick

em358-usb-stick
EM357 High Temp

Part Number

ZM3588S-USB
ZM3588S-USB-LR

Description

CEL's MeshConnect EM358 USB Sticks enable hardware vendors to quickly integrate ZigBee® and Thread into existing devices with a USB port. No RF design expertise is required. They can be used as a hardware development platform for rapid prototyping and as a companion to the MeshConnect EM358 Mini Modules.

The USB Sticks can be used for the following Development uses:

Platform for custom firmware development:

  • Runs EmberZNet PRO™ stack, including Smart Energy, Home Automation, Commercial Building Automation and ZigBee Light Link profiles
  • Virtual COM port is easily accessible by application software using a UART interface
  • Compatible with CEL's award-winning MeshWorks™ Platform
  • Ember InSight Port allows full debugging and trace capabilities

Sniffer for Over-the-Air network logging:

  • Full support for Silicon Labs' Desktop Network Analyzer, including protocol decoding, event aggregation, filtering and visualization tools
  • Quickly determine root cause of any networking issue to get your product to market faster

GUIs using Windows, Mac and Linux:

  • Allow users to interact with ZigBee network
  • Develop simulators to allow development testing to be completed if a certain network element is unavailable

ZM3588S-USB(-LR) supports Thread Protocol

The USB Sticks can be used for the following Production uses:

Network commissioning tool USB form factor provides a convenient interface for technicians to setup and verify new network installations and troubleshoot existing ones

Add ZigBee functionality to any device with a USB port

  • Easy to retrofit existing products to add ZigBee functionality
  • Reduce time to market and avoid the cost of a hardware redesign required for module- or IC-level integration

The MeshConnect USB Sticks are available in low and high output power options (+8 dBm and +20 dBm) to accommodate various range and performance requirements.

Read more...

Key Features

  • Enable ZigBee® and Thread on any device with a USB serial port
  • Based on Silicon Labs® EM358: 32-bit ARM® Cortex™-M3 processor with 512 kB Flash
  • Best-in-class RF performance for superior range
  • Direct connection to Ember InSight™ Adapter (ISA3) for programming and debugging EM35x applications
  • Contains the industry's premier ZigBee Pro stack: Ember ZNet PRO™
  • Supports Mesh, Point-to-Point and Point-to-Multipoint Networks

Key parameters

Part Number

ZM3588S-USB ZM3588S-USB-LR            

MCU

Supported Networks & Development Tools

Performance

Transceiver Chipset Ember EM3588 Ember EM3588 ZigBee® Tx Power Output +8 dBm +20 dBm
Flash Memory on Chip 512 kB 512 kB Thread
Rx Sensitivity -100 dBm -103 dBm
I/O - - MeshWorks™ Temperature -30° to 70° C -30° to 70° C
      Mesh Vcc 4.0 V to 5.25 V 4.0 V to 5.25 V



Point-to-Point Rx Current 51 mA 55 mA
Point-to-Multipoint Tx Current 65 mA 165 mA
Software / ZigBee Stack EmberZNet™ PRO (ZigBee PRO) EmberZNet™ PRO (ZigBee PRO) Sleep/Supend Current 0.24 µA 0.24 µA
Dimensions (Units in mm) 52.70 x 24.99 x 9.98 52.70 x 24.99 x 9.98



Features

  • Enable ZigBee® and Thread on any device with a USB serial port
  • Based on Silicon Labs® EM358: 32-bit ARM®® Cortex™-M3 processor with 512 kB Flash
  • Best-in-class RF performance for superior range
  • Direct connection to Ember InSight™ Adapter (ISA3) for programming and debugging EM35x applications
  • Contains the industry's premier ZigBee Pro stack: Ember ZNet PRO™
  • Supports Mesh, Point-to-Point and Point-to-Multipoint Networks

Datasheet

User Guides

Quality

  • Commercial and Residential Lighting
  • Smart Energy/Smart Grid
  • Home Automation and Control
  • Building Automation and Control
  • Security and Monitoring
  • M2M Industrial Controls
  • General ZigBee and Thread Wireless Sensor Networking
dev_tools

EM358 USB Stick Evaluations Kits Module

The ZM3588S-USB(-LR) are designed to be used in conjunction with the Cortet software suite and API for testing and development. They are also compatible with EM35x-DEV(-IAR), or equivalent kits from SiLabs. Please contact cortetsupport@cel.com for more information.